Raven RS1 Calibration And Operation Manual page 27

Hide thumbs Also See for RS1:

Table of Contents

3. Press the Left button to set the left WAS value.

NOTE:

Do not turn the steering wheel until the WAS page advances to the Center WAS setting.

FIGURE 23. Center WAS Calibration Page

4. Drive forward between 1.6 - 6.4 km/h [1 - 4 mph] with the machine wheels pointing straight ahead.

5. Press the Center button to set the center WAS value.

NOTE:

Do not turn the steering wheel until the WAS page advances to the Right WAS setting.

FIGURE 24. Right WAS Calibration Page

6. Drive forward between 1.6 - 6.4 km/h [1 - 4 mph].

7. Turn the steering wheel all the way to the right steering lock.

8. Press the Right button to set the right WAS value.

NOTE:

Do not turn the steering wheel until the following Calibration Complete page is displayed.

016-4010-001 Rev. J

CALIBRATION - HDU-SPECIFIC, MD, AND STEERING-READY

Table of Contents

Rs lite