Omron OMNUC W Series User Manual page 268

Operation
Pn114 Not used.
Pn115 Not used.
Pn116 Not used.
Pn117 Not used.
Pn118 Not used.
Pn119 Not used.
Pn11A Not used.
Pn11b Not used.
Pn11C Not used.
Pn11d Not used.
Pn11E Not used.
Pn11F Not used.
Pn120 Not used.
Pn121 Not used.
Pn122 Not used.
Pn123 Not used.
H Position Control Parameters (From Pn200)
D Position Control Setting 1 (Pn200: Default Setting 1011)
Pn200.0 Position control setting 1 --- Command pulse mode (Position)
Setting 0 to 9
range
Note Refer to 4-4-3 Important Parameters for details.
Pn200.1 Position control setting 1 --- Deviation counter reset (Position)
Setting 0 to 3
range
Setting Explanation
Setting
0 Reset deviation counter using high level signal (status signal)
1 Reset deviation counter using rising signal (Low to High)
2 Reset deviation counter using low level signal (status signal)
3 Reset deviation counter using sinking signal (High to Low)
4-52
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Unit ---
Unit ---
Default setting
Default setting
Default setting
Default setting
Default setting
Default setting
Default setting
Default setting
Default setting
Default setting
Default setting
Default setting
Default setting
Default setting
Default setting
Default setting
Default 1
setting
Default 1
setting
Explanation
Chapter 4
200
32
16
100
100
50
1000
50
70
100
100
0
0
50
0
0
Restart Yes
power?
Restart Yes
power?