Omron OMNUC W Series User Manual page 126

Standard Models and Specifications
Axis connector cable and I/O connector cable wiring
Please refer to MC402-E manual (cat. no. W903-E2).
H General Control Cables (R88A-CPWjS)
A General Control Cable is connected to the Servo Driver's Control I/O Connector (CN1). There is no
connector on the Controller end. When connecting it to a Position Control Unit with no special cable
provided, or to a controller manufactured by another company, wire a connector to match the controller.
Note There is one method for connecting to a Controller with no special cable provided, and another
method for using connector Terminal Block cable and a connector Terminal Block.
D Cable Models
Model
R88A-CPW001S
R88A-CPW002S
D Connection Configuration and External Dimensions
Controller
2-100
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Length (L) Outer diameter of sheath
1 m 12.8 dia.
2 m
Chapter 2
Weight
Approx. 0.3 kg
Approx. 0.6 kg
Servo Driver
R88D-WTj