Removing And Replacing The Systems Insight Display Power Module - HPE ProLiant DL360 Maintenance And Service Manual

Removing and replacing the Systems Insight Display power module

Removing and replacing the Systems Insight Display power module
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel .
5. Disconnect the cable from the system board.
6. Remove the component.
SFF
Removing and replacing the Systems Insight Display power module 182