Removing And Replacing The Flexiblelom - HPE ProLiant DL360 Maintenance And Service Manual

Hide thumbs Also See for ProLiant DL360:
Table of Contents

Advertisement

Removing and replacing the FlexibleLOM

Removing and replacing the FlexibleLOM
Procedure
Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Disconnect the LAN segment cables.
4. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
5. Remove the access panel .
6. Remove the FlexibleLOM.
To replace the component, reverse the removal procedure.
Removing and replacing the FlexibleLOM
147

Advertisement

Table of Contents
loading

Table of Contents