Removing And Replacing A Microsd Card - HPE ProLiant DL360 Maintenance And Service Manual

Removing and replacing a microSD card

Removing and replacing a microSD card
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel .
5. Remove the microSD card.
For information on the location of the microSD card slot, see System board components.
To replace the component, reverse the removal procedure.
Removing and replacing a microSD card 169