Removing and replacing the AC power supply
Removing and replacing the AC power supply
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated
CAUTION:
with either a component or a blank.
Procedure
Procedure
1. Power down the server (Power down the server).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Access the product rear panel ( Release the cable management arm ).
4. Remove the power supply.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the power supply or
WARNING:
power supply blank to cool before touching it.
To replace the component, reverse the removal procedure.
Removing and replacing the AC power supply
111