Removing And Replacing A Storage Controller - HPE ProLiant DL360 Maintenance And Service Manual

Removing and replacing a storage controller

Removing and replacing a storage controller
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel .
5. Disconnect any cables from the controller
Note the port numbers before disconnecting the cables.
6. Remove the controller.
To replace the component, reverse the removal procedure.
Removing and replacing a storage controller 148