Removing And Replacing A Dimm - HPE ProLiant DL360 Maintenance And Service Manual

Removing and replacing a DIMM

Removing and replacing a DIMM
To identify DIMMs installed in the server, see "DIMM slot locations."
Prerequisites Prerequisites
Before replacing memory, read the memory configuration and population guidelines in the server user guide.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel .
5. Remove the DIMM.
To replace the component, reverse the removal procedure.
Removing and replacing a DIMM 149