Reset - Gatekeeper G4-508HD4a User Manual & Installation Manual

G4-508HD4a User Manual & Install Guide
Storage

6.7.5 Reset

This subsection enables you to reset the DVR.
Reset
Hardware
Configuring the G4-508HD4a
Storage Type
Free/Total
Format
Navigate to:
Default All Settings
System Reboot
Hardware Config Import
Hardware Config Export
General Super Buttons
This shows the various storage devices which are
attached to the DVR. Available storage devices
shown may include any combination of HDD, SD
Card and/or USB flash drives.
This shows the total storage capacity of the
device, and the remaining free space on it.
Click the ( Format ) button format the associated
storage device. All data on that storage device will
be erased.
Main Menu à Setup à Maintenance à Reset
Click the ( Reset ) button in order to reset all
settings on the device to their factory default
values.
Click the ( Reboot ) button in order reboot the
device.
Click the ( Import ) button to export the Hardware
configuration settings from a file. You will need a
compatible configuration file saved on an external
storage device (most commonly a USB flash drive
attached to the device USB port).
Click the ( Export ) button to export the entire
Hardware configuration settings to a file. This file
will be saved on an external storage device (most
commonly a USB flash drive attached to the
device USB port).
Unsupported by Gatekeeper Systems. Reserved
for future development.
134 of 162