Video - Gatekeeper G4-508HD4a User Manual & Installation Manual

G4-508HD4a User Manual & Install Guide

6.6.2 Video

This subsection enables you to set up the trigger for alarm events based on video loss, and also to define the
actions that will be taken when the alarm occurs.
Video
Configuring the G4-508HD4a
Videoloss
selected cameras on-screen when the
alarm occurs.
None : Not displayed.
Single : Display 1 camera.
Quad : Display 4 cameras.
If Single (1x1) or Quad (2x2) display is
selected, the ( Setup ) button allows
you to select the layout of the channels
to be displayed on-screen.
The drop lists are shown on-screen
accordingly to the grid layout mode
selected. You can easily choose each
individual camera
displayed in the selected grid segment
visually. If you have less cameras than
available grid segments, then those
segments associated with an actual
camera will be displayed as a black box
PB Alarm Duration – numeric text field
§
to set the duration of the video playback
(in seconds) when the alarm occurs.
Alarm Snap – checkbox – if selected,
§
when the alarm occurs, the device will
take snap shots using the selected
cameras.
DEFAULT SETTINGS:
Please choose the camera channels to display and
record in the event of this alarm being triggered.
These settings would need to be determined by
the customer/client to match their specific
business requirements.
Navigate to: Main Menu à Setup à Alarm à Video
Checkbox – if selected, enables the device to
monitor for videoloss events. In case of videoloss
channel to be
124 of 162