Gatekeeper G4-508HD4a User Manual & Installation Manual page 142

G4-508HD4a User Manual & Install Guide
This substream recording settings configuration needs to be done for each individual camera channel
separately.
The following options will be available for configuration:
Choose Channel – drop list to select the particular channel to configure. When a channel is selected,
§
the corresponding recording settings for that channel will be displayed for viewing and editing.
Enable Channel – checkbox, if selected, would enable the substream recording on this channel. If
§
unselected, would mean that video from this channel would not be recorded and stored as part of
the substream.
Enable Audio – checkbox, if selected, would include audio into the recording. If unselected, there
§
would be no audio recorded for this channel.
Choose Resolution – drop list to select the resolution to record this channel at. Available resolution
§
options are QCIF (176x120), CIF (352x240), HD1 (704x240) and D1 (704x480).
Choose Frame Rate – drop list allowing you to select the frame rate (in terms of frames per second)
§
that you would like to record at.
Choose Quality – drop list allowing you to select the encoding quality (on a scale of 1 to 8 – where 1
§
is best).
Select Copy To Channel – this feature allows you to copy the current channel's substream recording
§
settings directly to another channel, thus allowing you to easily and quickly replicate the substream
recording settings across channels. Once you have selected the channel to copy to, click on the (
Copy ) button to make the copy.
Copy Settings – click the ( Copy ) button to copy the current settings to the selected channel.
§
Save Settings – click the ( OK ) button to save the current settings for the channel.
§
Back to Previous – click the ( Cancel ) button to exit back to the previous screen without saving.
§
Special Topics
142 of 162