Table of Contents
Advertisement
G4-508HD4a User Manual & Install Guide
Configuring the G4-508HD4a
Frame Rate
Quality
Record Mode
Drop list allowing you to select the frame rate (in
terms of frames per second) that you would like to
record at.
DEFAULT SETTINGS:
For all channels (1 to 12), set the following:
15
§
Drop list allowing you to select the encoding
quality (on a scale of 1 to 8 – where 1 is best).
DEFAULT SETTINGS:
For all channels (1 to 12), set the following:
1 (Best)
§
Drop list allowing you to select the record mode:
Power Up – device will record whenever
§
it is powered on.
Timer – device will record following the
§
configured schedule.
Alarm – device will record whenever
§
there is an alarm event detected.
If the Record Mode selected is Timer, then a (
Schedule ) button will be enabled. Click this
button to display the schedule management
screen where you will be able to perform the
following functions:
Add a Plan – use the drop list to select a
§
day of the week (from Sunday to
Saturday). Clicking the ( Add a Plan )
button will then add a timer recording
schedule to the task list.
Start Time – this is a time field which
§
allows you to set the starting time to
begin the recording.
End Time – this is a time field which
§
allows you to set the ending time to stop
the recording.
Video Type – this is a drop list which
§
allows you to select the type of video to
be record (either Normal video, or Alarm
video only).
x – you can always click the (x) button to
§
remove the associated recording task
from the list.
97 of 162
Advertisement
Table of Contents
