Alarm Settings - Gatekeeper G4-508HD4a User Manual & Installation Manual

G4-508HD4a User Manual & Install Guide
6.6

Alarm Settings

Configuring the G4-508HD4a
Manual Snap
Disabled/not applicable.
These settings are used for snapshots which are
taken manually by the user. Clicking the ( Setup )
button displays the snap link settings page which
allows you to configure the settings.
In the configuration screen, you will be able to
configure the snapshot settings for each
individual camera channel in turn:
Channel – this is a drop list allowing you
§
to select a particular camera channel.
The associated snapshot settings for this
channel will be displayed for editing.
Snap Enable – if the checkbox is
§
selected, then this camera channel is
included when the DVR performs the
snap shots.
Resolution – this drop list enables you to
§
select the resolution for the snapshots.
Available options are (HD1, WHD1, D1,
WD1, 720P).
Quality – this drop list enables you to
§
select the quality of the snapshot on a
scale of 1 to 8 (where 1 is best).
Upload Type – checkboxes which allow
§
you to select whether the snapshots are
to be uploaded to FTP and/or Server.
Snap Numbers – numeric text field to
§
key in the number of snapshots that will
be taken.
Copy To – this feature allows you to copy
§
the current snapshot settings for this
channel to another channel, thus
allowing you to easily and quickly
replicate the snapshot settings for the
different camera channels. Once you
have selected the channel to copy to,
click on the ( Copy ) button to make the
copy.
DEFAULT SETTINGS:
Disabled/not applicable.
Navigate to: Main Menu à Setup à Alarm
116 of 162