Gatekeeper G4-508HD4a User Manual & Installation Manual page 109

G4-508HD4a User Manual & Install Guide
Configuring the G4-508HD4a
Sensor Name
OSD Name
Sensor Uses
Copy To
-
For quick configuration, the copy function
allows you to easily copy the settings of the
current sensor to another sensor.
Alphanumeric text field for setting a friendly name
to easily identify the sensor.
You may input up to a maximum of:
8 characters
§
Alphanumeric text field for setting a short code
name identifying this sensor on the OSD (text data
overlay on the video).
You may input up to a maximum of:
5 characters
§
Normally set to None but is reserved for Stop Arm
Alarm use.
This feature allows you to easily copy the
configuration settings for this sensor to another
selected sensor. Use the drop list to select a
sensor number – then clicking the ( Copy ) button
will replicate the current sensor settings to the
selected sensor.
DEFAULT SETTINGS:
Sensor Number: 1
Sensor Name – BRAKE
§
OSD Name – BK
§
Sensor Number: 2
Sensor Name – WARNING
§
OSD Name – WN
§
Sensor Number: 3
Sensor Name – STOPARM
§
OSD Name – SA
§
Sensor Number: 4
Sensor Name – DOOR
§
OSD Name – DR
§
109 of 162