Gatekeeper G4-508HD4a User Manual & Installation Manual page 73

G4-508HD4a User Manual & Install Guide
DST
Configuring the G4-508HD4a
NTP Sync
Enable
Offset
Mode
-
This setting requires a constant network
connection either via cellular or WiFi.
DEFAULT SETTINGS:
Checkbox – Unselected
§
Checkbox – specifies if the device will synchronize
the date and time periodically with a selected
Time Server.
If this option is selected, you will also need to use
the associated drop list to specify which Time
Server will be used for the time synchronization.
Note:
-
This setting requires a constant network
connection either via cellular or WiFi.
DEFAULT SETTINGS:
Checkbox – Unselected
§
Checkbox – selecting this will enable the device to
calculate and adjust for daylight savings time.
DEFAULT SETTINGS:
Checkbox – Selected
§
Drop list which allows you to choose the offset
value to be used for the daylight savings
calculation:
One Hour (system will offset the time by
§
an hour when daylight savings is active)
Two Hours (system will offset the time by
§
two hours when daylight savings is active)
DEFAULT SETTINGS:
One Hour
§
Drop list which allows you to choose the mode to
be used for the daylight savings calculation:
Week (enable the system to activate
§
daylight savings based on a specified day
of the week in the year)
73 of 162