Table of Contents
Advertisement
G4-508HD4a User Manual & Install Guide
All settings related to alarm events are contained in this section. The user can configure the settings for the
various alarms such as speed, panel, IO, ACC, as well as video loss events.
6.6.1 Base
This subsection enables you to set up the trigger for alarm events based on speed, panel and IO input, and
also to define the actions that will be taken when the alarm occurs.
Speed Alarm
Configuring the G4-508HD4a
Figure 6-9 Alarm Tab in the Device Configuration Options
Overspeed / Enable
Alarm Type
Trigger
Navigate to:
Main Menu à Setup à Alarm à Base
Checkbox – if selected, enables the device to
monitor for overspeed events. In case of speed
exceeding the specified threshold, this alarm will
be triggered.
DEFAULT SETTINGS:
Checkbox – Unselected
§
Drop list to select the classification level for the
alarm:
Important
§
General
§
DEFAULT SETTINGS:
Disabled/not applicable.
Click the ( Setup ) button under Trigger to display
the Trigger setup screen.
117 of 162
Advertisement
Table of Contents
