Figure 2-2 Close Up View Of The G4-508Hd4A Status Indicator Lights - Gatekeeper G4-508HD4a User Manual & Installation Manual

G4-508HD4a User Manual & Install Guide

Figure 2-2 Close Up View of the G4-508HD4a Status Indicator Lights

LED
HDD
SD
GPS
NET
HTR
PWR
REC
VLOSS
ALM
ERR
Your G4-508HD4 at a Glance
Illuminated blue indicates HDD is present. Flashing indicates activity.
Do not remove the HDD when the light is flashing as this may result in
Illuminated green indicates SD Card is present. Flashing indicates
activity. Do not remove the SD Card when the light is flashing as this
Illuminated green indicates GPS signal is available.
Illuminated green indicates network connection is available.
(Note: The LAN LED status light is currently not supported)
Illuminated green indicates HDD heater is on. This heater turns on
when the vehicle environment is below the optimal HDD operating
temperature range. The HDD will only start recording after it reaches
the required operating temperature range.
Illuminated blue indicates the device is powered.
Illuminated green indicates that the device is recording.
Illuminated / flashing red indicates that a video loss has occurred.
Illuminated / flashing red indicates that a sensor has triggered an alarm.
Illuminated / flashing red indicates a physical hardware error.
Description
data loss.
may result in data loss.
11 of 162