Table of Contents
Advertisement
G4-508HD4a User Manual & Install Guide
Configuring the G4-508HD4a
Clicking the ( Add ) button will add a snapshot
schedule task to the displayed task list with the
following settings that you can edit:
Start Time – this is a time field which
§
allows you to set the starting time to
begin taking the snapshots.
End Time – this is a time field which
§
allows you to set the ending time to stop
taking the snapshots.
x – you can always click the (x) button to
§
remove the associated snapshot task
from the list.
3 – this button will display the snapshot
§
link set screen where you can edit the
configuration settings for the snapshots
taken during this snapshot task.
In the configuration screen, you will be able to
configure the snapshot settings for each
individual camera channel in turn:
Channel – this is a drop list allowing you
§
to select a particular camera channel.
The associated snapshot settings for this
channel will be displayed for editing.
Snap Enable – if the checkbox is
§
selected, then this camera channel is
included when the DVR performs the
snap shot task.
Resolution – this drop list enables you to
§
select the resolution for the snapshots.
Available options are (HD1, WHD1, D1,
WD1, 720P).
Quality – this drop list enables you to
§
select the quality of the snapshot on a
scale of 1 to 8 (where 1 is best).
Upload Type – checkboxes which allow
§
you to select whether the snapshots are
to be uploaded to FTP and/or Server.
Snap Numbers – numeric text field to
§
key in the number of snapshots that will
be taken.
Interval – numeric text field to key in the
§
interval (in seconds) between snapshots.
Copy To – this feature allows you to copy
§
the current snapshot settings for this
channel to another channel, thus
allowing you to easily and quickly
replicate the snapshot task settings.
Once you have selected the channel to
copy to, click on the ( Copy ) button to
make the copy.
114 of 162
Advertisement
Table of Contents
