Gatekeeper G4-508HD4a User Manual & Installation Manual page 74

G4-508HD4a User Manual & Install Guide
Configuring the G4-508HD4a
Start
End
Date (set an actual hard date for when
§
daylight savings is active)
DEFAULT SETTINGS:
Week
§
This is a set of fields which allow you to choose the
starting point of the period for which the device
will adjust for daylight savings time.
If the device is adjusting for daylight savings by
Week, you will need to specify the following:
Drop list to choose the start month (from
§
JAN to DEC).
Drop list to choose the start week (either
§
1 ST , 2 ND , 3 RD , 4 TH
Drop list to choose the start day (from
§
SUNDAY to SATURDAY).
Time field to choose the start time.
§
If the device is adjusting for daylight savings by
Date, you will need to specify the following:
Date field to set the start date.
§
Time field to set the start time.
§
DEFAULT SETTINGS:
MAR (month)
§
2ND (week)
§
SUNDAY (day)
§
02:00:00 (time)
§
This is a set of fields which allow you to choose the
ending point of the period for which the device
will adjust for daylight savings time.
If the device is adjusting for daylight savings by
Week, you will need to specify the following:
Drop list to choose the end month (from
§
JAN to DEC).
Drop list to choose the end week (either
§
1 ST , 2 ND , 3 RD , 4 TH
Drop list to choose the end day (from
§
SUNDAY to SATURDAY).
Time field to choose the end time.
§
If the device is adjusting for daylight savings by
Date, you will need to specify the following:
Date field to set the end date.
§
or LAST).
or LAST).
74 of 162