Basic System Quick Start; Step 1: Powering Up The G4-508Hd4A; Step 2: Connecting Your Navigation Device; Figure 4-1 Live Camera View Shown On Device Startup - Gatekeeper G4-508HD4a User Manual & Installation Manual

Table of Contents

G4-508HD4a User Manual & Install Guide

4 Basic System Quick Start

Your G4-508HD4a will have already come pre-configured by Gatekeeper Systems with the most common

default settings which are applicable to most deployments – and you will only need to verify and adjust the

basic settings to get up and running. The following sections will guide you through the basic setup process so

that you can begin using your new product as soon as possible.

4.1

The Gatekeeper Project Team are able to mount and install the device into the vehicle based on your

requirements and in accordance with industry best practices from years of experience. If you prefer to mount

the device yourself, please read

Turning your vehicle ignition on will automatically power up the G4-508HD4a. When your vehicle ignition is

turned off, the device will automatically shut down after 5 minutes (you will be able to change this later in the

device settings).

4.2

Once the device has powered up, please verify that you can see the display on your LCD monitor or ICD2 with

live video from connected cameras shown.

You may now use the supplied navigation device (either the IR Remote Control or Finger Mouse or ICD2) to

perform the rest of the basic setup process. For more details on connecting and using the navigation devices,

please read

Section 3.1

Basic System Quick Start

Chapter 9

for detailed hardware installation instructions.

and

Section

3.2.

36 of 162

Table of Contents