Table of Contents
Advertisement
G4-508HD4a User Manual & Install Guide
4.7
Step 7: Setting Up Authorised Users
Next you can add additional user login accounts to the device if required.
Navigate to:
Main Menu à Setup à Basic Setup à User Setup
Your G4-508HD4a comes pre-configured with the following two default user accounts:
Default administrator user
Username – admin
§
Password - admin
§
Default normal user
Username – user
§
Password - user
§
It is highly recommended that you do not change the password on the default administrator account, as this
account will be used by authorised Gatekeeper Systems engineers to troubleshoot your device during support
and maintenance.
You may change the password for the default normal user account, and also add an additional normal user
account if required. For a detailed explanation on how to do this, please see
4.8
Step 8: Setting Up Recording
The G4-508HD4a is a hybrid DVR. It has the capability of having a combination of Analog; Analog HD and up to
4 IP cameras connected at the same time.
This next step is a crucial step, where you will select the cameras to record the video from, and also set up the
quality and resolution of the recorded video.
Navigate to:
Main Menu à Setup à Surveillance à Record
Please review and adjust the following default settings to match your actual camera configuration. For a
detailed explanation of each setting, please see
General
Basic System Quick Start
Section
System
Overwrite
Lock Duration
Section
6.4.2.
DEFAULT SETTINGS:
NTSC
§
DEFAULT SETTINGS:
By Capacity
§
DEFAULT SETTINGS:
7 days
§
6.3.4.
43 of 162
Advertisement
Table of Contents
