Table of Contents
Advertisement
Y35 HD v3
User Manual & Install Guide
All external drives or SD cards that are used for recording must be:
1. Formatted as N9M (There is a setting to set to N9M or FAT32. N9M MUST be selected) AND
2. The status on ICD/G4Connect must be showing as "Recording".
For a detailed explanation of formatting external drives or SD Cards, please see
To check the recording status of an external drive:
1. Select System Information (Biz Menu)
2. Select Storage
The Status MUST be shown as "Recording".
6.6.5 Reset
This subsection enables you to reset the Y35 HD v3.
Reset
Free/Total
Format
Navigate to:
Factory Default Settings
System Reboot
This shows the total storage capacity of the
device, and the remaining free space on it.
Click
the
(Format)
associated storage device. All data on that
storage device will be erased.
Main Menu
Setup
→
→
Click the (Reset) button in order to reset all
settings on the device to their factory default
values.
Click the (Reboot) button in order reboot the
device.
button
format
the
To Format to N9M:
Maintenance
Reset
→
136 of 156
Advertisement
Table of Contents
