Figure 2-3 Rear View Of The G4-508Hd4A - Gatekeeper G4-508HD4a User Manual & Installation Manual

G4-508HD4a User Manual & Install Guide
1. GPS 3G Antenna In: This is the connection point for the external GPS and 3G antenna. If there are no
GPS/3G antenna attached, these ports should be covered with a rubberized cap.
2. A/V In: This is the input port for the audio and video signals from all the attached analog cameras.
This port uses the CAB000358 cable for the connection.
3. Ports for connecting Power and the ICD2. The Amplifier port is currently reserved for future
development.
4. LAN Port: This is the network port for the device. This is connected to the network or 4-port switch to
receive input and send commands to one or more IP Cameras. This port is also used for connection
to the wireless equipment in a Gatekeeper Wireless deployment.
5. USB Out: Used to connect the Gatekeeper Systems Firebox. Speak with your sales representative for
more information.
6. Sensor In: This is the input port for the attached sensors. This port uses the CAB000353 cable for the
connection.
Your G4-508HD4 at a Glance

Figure 2-3 Rear View of the G4-508HD4a

12 of 162