G4-508HD4a User Manual & Install Guide
3.4
Viewing Live Video
Single Camera On-screen View
When the screen is in Single Camera On-screen View mode, camera from a single camera channel will
§
be shown on the entire screen.
In order to select a specific camera for viewing, you may press any of the keys [1-9] on the IR Remote
§
Control or the ICD2 to immediately jump to that channel and display the video stream from the
corresponding camera.
To jump to channels 10 and above, you can press the two keys which represent the channel
number, in quick succession (eg. to jump to channel 12, press the key [1] followed by the
key [2] immediately).
You can also cycle through the channels iteratively by pressing the key zero [0] on the IR Remote
§
Control or the ICD2.
Figure 3-8 Cycling through the Video Channels in Single View
Getting Started
26 of 162