Table of Contents
Advertisement
G4-508HD4a User Manual & Install Guide
Location
Mileage
6.5.2 Snap Setting
This subsection enables you to view and edit the triggers and settings for capturing snapshots.
Time Snap
Configuring the G4-508HD4a
Location Data Source
Total
Base Mileage
Operation
Navigate to:
Time Snap
Notes:
-
If the measurement unit is set to Pulse, you will
also need to select the calibration mode and
perform a manual calibration.
-
Pulse mode is currently unsupported, and
Gatekeeper Systems recommends the use of
Satellite for this setting.
DEFAULT SETTINGS:
Satellite
§
Drop list for setting the navigation mode:
GPS
§
Notes:
-
Currently, this is the only available setting.
DEFAULT SETTINGS:
GPS
§
Displays the total mileage which the vehicle has
travelled.
Sets the mileage of the vehicle on first day of
service on that route. This value can be entered
manually.
Correct: Allows the current mileage of the vehicle
to be entered.
Clear: Resets the mileage to 0.
Main Menu à Setup à Collection à Snap Setting
Checkbox – if selected, this feature allows you to
set up a schedule to capture snapshots using the
cameras.
113 of 162
Advertisement
Table of Contents
