Gatekeeper G4-508HD4a User Manual & Installation Manual page 59

G4-508HD4a User Manual & Install Guide
Step 5.2 After selecting the camera channels, you can also specify the time period of the video
§
data that you wish to export.
Click on the Playback Start Time to key in the specific start time of the video that you
§
wish to export.
Alternatively, if you are using either the Finger Mouse or the ICD2, you may also click and
§
drag the Playback Start Time Marker to the start time that you desire.
Click the ( Start Time ) button to register this as the desired start time. Your selection
§
will be displayed on the screen.
Next, select the desired end time by once again clicking on the time and keying in, or
§
moving the marker as before.
When your desired end time is displayed, click the ( End Time ) button to register this.
§
Your selected end time will be displayed on the screen.
§
The system will calculate and display the estimated file size of the video clip for this
§
selected time period.
Click the ( Export ) button to proceed.
§
You may also click the ( Cancel ) button in order to go back and select a different time
§
period.
Viewing Recorded Data
59 of 162