Table of Contents
Advertisement
G4-508HD4a User Manual & Install Guide
Motion
Configuring the G4-508HD4a
Name
Enable
Alarm Type
Trigger
Quad : Display 4 cameras.
If Single (1x1) or Quad (2x2) display is
selected, the ( Setup ) button allows
you to select the layout of the channels
to be displayed on-screen.
The drop lists are shown on-screen
accordingly to the grid layout mode
selected. You can easily choose each
individual camera channel to be
displayed in the selected grid segment
visually. If you have less cameras than
available grid segments, then those
segments associated with an actual
camera will be displayed as a black box
PB Alarm Duration – numeric text field
§
to set the duration of the video playback
(in seconds) when the alarm occurs.
Alarm Snap – checkbox – if selected,
§
when the alarm occurs, the device will
take snap shots using the selected
cameras.
DEFAULT SETTINGS:
Please choose the camera channels to display
and record in the event of this alarm being
triggered. These settings would need to be
determined by the customer/client to match
their specific business requirements.
Set to Motion.
Enables whether or not motion detection will be
enabled.
Default settings:
Unselected.
§
Sets whether or not Motion detection will be
triggered by and Event or an Alarm.
Default settings:
Alarm.
§
Setup: Click the setup button and a
§
separate window will appear for Motion
detection setup. In this window several
127 of 162
Advertisement
Table of Contents
