User Setup - Gatekeeper G4-508HD4a User Manual & Installation Manual

G4-508HD4a User Manual & Install Guide

6.3.4 User Setup

This subsection enables you to add and edit users, as well as change the passwords required to log into the
system.
User Setup
Configuring the G4-508HD4a
Voltage Startup
Low Volt Upload
Navigate to:
Idle Time
User Name / User Group
Numeric text field to set the recovery boot voltage
threshold. When the vehicle battery recovers its
charge and is consistently above this threshold
value, the device will automatically turn on again.
For a vehicle with a 12V battery, the
recommended threshold value is 12.5V. For a
vehicle with a 24V battery, the recommended
threshold value is 24.5V.
DEFAULT SETTINGS:
Disabled/not applicable.
Checkbox – selected will enable the device to log
and report if low voltage situation occurs.
DEFAULT SETTINGS:
Checkbox – Unselected
§
Main Menu à Setup à Basic Setup à User Setup
Drop list which allows you to set the login time out
period. Users will be automatically logged out
after the specified period of inactivity:
30 Seconds
§
1 Minute
§
3 Minutes
§
5 Minutes
§
10 Minutes
§
Never
§
DEFAULT SETTINGS:
3 Minutes
§
The User Name shows the list of users who are set
up in the system. The User Group shows the type
of user. Checkboxes next to the user names allow
you to select the specified user to edit or delete.
77 of 162