Table of Contents
Advertisement
G4-508HD4a User Manual & Install Guide
7 Special Topics
7.1
Setting Up IP Cameras
In contrast to setting up analog cameras, which just involves wiring up the camera to the appropriate channel
input on the device, there is an extra step required for IP Cameras. After being connected physically to the 4
Port Camera switch available from Gatekeeper Systems, the IP Cameras need to be configured in the system
with the appropriate settings and IP addresses before they will work.
In the G4-508HD4a though, adding a new IP camera to the system can easily be done through the automated
setup options available in the setup menu.
7.1.1 Manually Adding an IP Camera
The steps below provide a quick guide to adding a new IP Camera to the system manually.
For a detailed discussion on the configuration options available, please refer to
Step
Navigate to:
7.1.1.1
Enable the channel that you wish to set up the new IP Camera on, by selecting the
§
checkbox next to the channel number.
Take note of the IP addresses of the IP Cameras which are currently configured in the
§
system. You will need to compare against these IP addresses in the next step.
Click on the ( L ) icon which is on the same row as the channel number you wish to add
§
the new IP Camera on.
Step
The system will enumerate all the IP Cameras connected to the system, and display a list
§
7.1.1.2
for you to select the new IP Camera to bind to this channel.
Special Topics
Main Menu à Setup à Surveillance à IPC Setup
Section
6.4.3.
135 of 162
Advertisement
Table of Contents
