Table of Contents
Advertisement
G4-508HD4a User Manual & Install Guide
Trigger Snap
Configuring the G4-508HD4a
Alarm Snap
DEFAULT SETTINGS:
Checkbox – Unselected
§
Setting this enables the device to automatically
take snapshots whenever an alarm event occurs.
Clicking the ( Setup ) button displays the snap link
settings page which allows you to configure the
settings for the snapshots to be taken where there
is an alarm event.
In the configuration screen, you will be able to
configure the snapshot settings for each
individual camera channel in turn:
Channel – this is a drop list allowing you
§
to select a particular camera channel.
The associated snapshot settings for this
channel will be displayed for editing.
Snap Enable – if the checkbox is
§
selected, then this camera channel is
included when the DVR performs the
snap shots.
Resolution – this drop list enables you to
§
select the resolution for the snapshots.
Available options are (HD1, WHD1, D1,
WD1, 720P).
Quality – this drop list enables you to
§
select the quality of the snapshot on a
scale of 1 to 8 (where 1 is best).
Upload Type – checkboxes which allow
§
you to select whether the snapshots are
to be uploaded to FTP and/or Server.
Snap Numbers – numeric text field to
§
key in the number of snapshots that will
be taken.
Interval – numeric text field to key in the
§
interval (in seconds) between snapshots.
Copy To – this feature allows you to copy
§
the current snapshot settings for this
channel to another channel, thus
allowing you to easily and quickly
replicate the snapshot settings for the
different camera channels. Once you
have selected the channel to copy to,
click on the ( Copy ) button to make the
copy.
DEFAULT SETTINGS:
115 of 162
Advertisement
Table of Contents
