Gatekeeper G4-508HD4a User Manual & Installation Manual page 85

G4-508HD4a User Manual & Install Guide
NOTE: THE FOLLOWING SECTION (SERVER) IS ONLY APPLICABLE WHEN THE DEVICE IS BEING CONFIGURED AS
PART OF A GATEKEEPER WIRELESS DEPLOYMENT.
Server
Configuring the G4-508HD4a
Center Server
ON
Protocol Type
Enable Network
Disabled/not applicable.
Drop list which displays a list of center servers
configured in the device. Selecting one of them
will display the currently set configuration values,
and allow you to modify them.
These configuration values are server specific. If
you have more than one center server set up, you
will need to select each in turn and configure them
separately.
Add – this button allows you to add a new center
server name and configure its settings.
Delete – this button deletes the selected center
server and its associated configuration settings.
Notes:
- You may add up to 5 center servers.
-
Server 1 is the default center server and it
cannot be deleted.
DEFAULT SETTINGS:
Server 1
§
Checkbox – selecting this will mark the selected
server as active.
DEFAULT SETTINGS:
Checkbox – Selected
§
Drop list to select the protocol type option for the
selected center server:
N9M
§
808
§
Maintenance
§
DEFAULT SETTINGS:
N9M
§
Drop list to select the network mode used to
communicate with the selected center server:
85 of 162