Table of Contents
Advertisement
G4-508HD4a User Manual & Install Guide
These unused channels can be reassigned to the IP Cameras instead, thus enabling you to view video from all
cameras sequentially.
To do this, follow the steps in the previous
channels, make sure to select the desired lower channels (rather than leaving it at the default channels 9 to
12).
After that, go to the Record settings under the Surveillance tab in the Setup menu as follows:
[Navigate to:
Main Menu à Setup à Surveillance à Record à Main
Use the Channel drop list to go to each of the channels that you have bound the IP Cameras to, and ensure
that the Enable checkbox is selected.
The IP Cameras will now be displayed and recorded on those channels.
Special Topics
Figure 7-1 Unused Channels Displayed as Black
Section 7.1
Figure 7-2 Enabling Camera Channels
to set up the IP Cameras, but when choosing the binding
Stream]
140 of 162
Advertisement
Table of Contents
