Y35 HD v3
User Manual & Install Guide
3.4 Viewing Live Video
Single Camera On-screen View
When the screen is in Single Camera On-screen View mode, camera from a single camera
▪
channel will be shown on the entire screen.
In order to select a specific camera for viewing, you may press any of the keys [1-5] on the ICD2
▪
to immediately jump to that channel and display the video stream from the corresponding
camera.
You can also cycle through the channels iteratively by pressing the key zero [0] on the ICD2.
▪
Figure 3-6 Cycling through the Video Channels in Single View
2 Camera On-screen View
In 2 Camera (Dual) On-screen View mode, the screen is split into two sections (using a 2x1
▪
layout) and video from two cameras is simultaneously shown on the screen.
In order to select a specific camera for viewing, you may press any of the keys [1-5] on the ICD2
•
to immediately jump to that channel and display the video stream from the corresponding
camera. This will switch the display to Single Camera On-screen View to display the video from
the selected camera.
Alternatively, with the Finger Mouse or the ICD2, you could also click on any video stream on
•
the (2x1) display to immediately jump to that channel and display the video from the
corresponding camera. This will switch the display to Single Camera On-screen View to display
the video from the selected camera.
Once you have selected a channel to view, you can cycle through the available channels
•
iteratively in quad grid display mode by pressing the key zero [0] on the ICD2.
4 Camera On-screen View
In 4 Camera (Quad) On-screen View mode, the screen is split into four sections (using a 2x2
▪
grid layout) and video from four cameras is simultaneously shown on the screen.
In order to select a specific camera for viewing, you may press any of the keys [1-5] on the ICD2
▪
to immediately jump to that channel and display the video stream from the corresponding
26 of 156