Total Count By Size - Kyocera KM-8030 Advanced Operation Manual

Job Accounting
5
Press [Close].
6 Press [Close]. The touch panel will return to the Job Accounting screen.

Total Count by Size, 1-5

You can register specific paper sizes to monitor so that you can check the copy count. You can also
register types of paper.
NOTE: Up to five different paper sizes can be registered for keeping track of the copy count.
If you do not specify the paper type, the registered paper size will be counted regardless of the type.
However, if you register a size without specifying the type as the first entry and register the same
size with a type as the second entry, the copy count for the first entry will not include the count of the
second entry.
1 Access the Job Accounting screen. (For instructions, refer to Accessing the Job Accounting Screen
on page 4-3.)
2 Press [Job Accntg Def. Set.].
3 Select Total size 1-5 and press [Change
#].
4
Press [On].
5 Press [Select size].
4-26
Job Accounting
Job Accountg T
Management Each Mgt.
Total Total
System Menu
Job Accounting Def set.
Setting Item
Excess of limit Setting Stop after job done
Def. Val. of coun. Limit
Total size 1 11x17"
Total size 2 8½x14"
Total size 3 8½x11"
Total size 4 11x8½"
Total size 5 5½x8½"
System Menu - Job Accounting - Job Accounting Def set.
Total size 1
Can set totals of paper size and type.
Off
On
System Menu - Job Accounting -
Total size 1
Can set totals of paper size and type.
Paper Size
11x17"
Select
Off
size
On
System Menu - Job Accounting - Job Accounting Def set.
Register/Sett.
Management Job Accntg
Edit Def. Set.
Value
No specif.
No specif.
No specif.
Change #
No specif.
No specif.
Back
Job Accounting Def set.
Back
Paper Type
With no
specif.
J
O