Download Print this page

Kyocera KM-8030 Advanced Operation Manual Page 75

Kyocera km-8030: user guide.
Hide thumbs

Advertisement

2
For finishing, press [On] ([1 set] or
[Output each page]) or [Off]. Refer to
Offset Mode on page 1-10 for details.
For stapling, press [Staple Mode] and
complete the settings. Refer to Stapling
on page 1-11 for details.
For hole punching, press [Punch Mode]
and complete the settings. Refer to
Punching on page 1-13 for details.
For center margin stapling, press
[Saddle Stitch] ([Center Staple]) and
complete the settings.
For center margin stapling, press
[Saddle stitch].
For center margin stapling with center
folding, press [Bind & Fold].
3
Follow the instructions at the right of the touch panel and confirm the orientation of the placed
originals.
NOTE: Failure to place originals correctly may result in copying errors.
4
Press [Close].
Ready to Job build.
Place originals then press Start key.
Finished
Offset
Staple
Staple
Off
Mode
On
Saddle
Stitch
Ready to Job build.
Place originals then press Start key.
Staple Mode
Staple
Limited number of staple pages.
None
The limit is set in setting mode.
1 staple
!
When selecting staple function
2 staples
the offset can not be combined.
Ready to Job build.
Place originals then press Start key.
Punch Mode
Punch
None
2 holes
3 holes
Ready to Job build.
Place originals then press Start key.
Saddle Stitch
Off
Saddle
stitch
Bind &
Fold
Copying Functions
Back
Punch
Select Original Ima
Direction.
Punch
Mode
None
Top Edge
Back
Select Original I
Direction.
Top Edge
Back
Preview
Select Original Im
Direction.
Top Edge
Back
1-69

Advertisement

Table Of Contents

   Related Manuals for Kyocera KM-8030

This manual also for:

Km-6030, 8030, 6030

Comments to this Manuals

Symbols: 0
Latest comments: