Erasing Hard Disk Contents - Kyocera KM-8030 Advanced Operation Manual

Erasing Hard Disk Contents

If the copier is equipped with the optional security kit, you can specify the method for erasing the
contents of the hard disk.
NOTE: For details on methods of hard disk erasure, refer to the security kit Operation Guide.
This setting is available only if the copier is equipped with the optional security kit.
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2 Press [ ] or [ ] to select Hard Disk
Delete Method and press [Change #].
3
Press [Once Overwrite] or [3-time
Overwrite] erasure method.
4 Press [Close]. The touch panel will return to the Machine Default screen.
System Menu / Counter
Machine Default
Default menu
Management code change
Auto sleep On
Auto Clear On
Copy Job Priority Off
Hard Disk Delete Method "Once Overwrite" Method
System Menu
Hard Disk Delete Method
Possible to set method for deleting data
on the Hard Disk
Once
Overwrite
3-time
Overwrite
System Menu - Machine Default
System Settings
Setting mode
Change #
Back
3-35