Auto Detect Originals - Kyocera KM-8030 Advanced Operation Manual

System Settings
3
Select [Adj. Print Direction] or, to switch
this feature off, select [Speed Priority].
[Speed Priority] lets copying revert to the
normal copying speed.
4 Press [Close]. The touch panel will return to the Machine Default screen.
Align the original and the target letterhead paper as diagrammed above before starting copying.

Auto Detect Originals

Allows you to predetermine what paper size is selected for printing when copying an original
document of non-standard sizes (Refer to below.). This feature is applicable When the size of the
original is either cardstock, A4R, B4R or Folio. The menu also provides the means to determine
whether 11 × 15" is recognized as a standard size.
NOTE: This setting is only available for metric models.
1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2
Press [ ] or [ ] to select Org. Auto
Detect Setting and press [Change #].
3 Press [ ] or [ ] to select the paper size
to set up. Press [Change #].
When the size of the original document
is cardstock or A6R, choose [Cardstock]
to copy it onto cardstock size or [A6] to
copy it on A6R size.
When the size of the original document
is B4R or Folio, choose [B4] to copy it on
B4R size or [Folio] to copy it on Folio
size.
When the size of the original document is 11 × 15" (computer form), you can choose whether the
original document is automatically zoomed to the currently selected paper ([On]) or the copier halts
and prompts you to investigate the size of the original document ([Off]).
4
Press [Close]. The touch panel will return to the Machine Default screen.
3-26
Special paper action mode
Possible to set action of the paper
(Prepunched, Preprinted, Letterhead)
Adj. Print
Direction
Speed
Priority
System Menu - Machine Default
System Menu / Counter
Machine Default
Default menu
Check MP tray sizing On
Paper Type (paper weight)
Select paper type(2sided)
Special paper action mode Adjust print direction
Org. Auto Detect Setting
System Menu
Org. Auto Detect Setting
Possible to set when using Original Auto Detection
Default menu
Card Stock/A6 A6
B4 /Folio Folio
11x15" Off
System Menu - Machine Default
Back
Setting mode
Change #
Setting mode
Change #