Choosing The Appropriate Paper; Supported Paper Sizes - Kyocera KM-8030 Advanced Operation Manual

Choosing the Appropriate Paper

This section describes guidelines for choosing paper.
Condition
Avoid using paper with bent corners or that is curled, dirty, or torn. Do not use paper that has a
rough surface or paper fiber lint, or that is especially delicate. Use of paper in any of these
conditions will not only deliver poor copies but may also cause jams and shorten the useful life of
the copier. Choose paper with a smooth and even surface; however, avoid coated paper or paper
with a treated surface as it may damage the drum or fusing unit.
Ingredient
Do not use paper such as paper that has been coated or surface-treated or paper that contains
plastic or carbon. These paper may produce harmful fumes from the heat of copying and may
damage the drum.
Be sure to use the standard paper that contains at least 80 % pulp, i.e., not more than 20 % of the
total paper content consists of cotton or other fibers.

Supported Paper Sizes

Paper of the following sizes is supported by the cassettes and MP tray.
Measurements in the table take into account a ±0.7-mm dimensional accuracy for length and width.
Corner angles must be 90° ±0.2°.
MP Tray
B6R (128 × 182 mm)
Postcard (100 × 148 mm)
Return postcard (148 × 200 mm)
Executive (7
Envelope DL (110 × 220 mm)
Envelope C5 (162 × 229 mm)
Envelope C4 (229 × 324 mm)
ISO B5 (176 × 250 mm)
Comm. #10 (4
Comm. #9 (3
Monarch (3
YOUKEI 2 (114 × 162 mm)
YOUKEI 4 (105 × 235 mm)
Input size
(3
(98 × 148 to 297 × 432 mm)
× 10 ")
1/4 1/2
× 9 ")
1/8 1/2
× 8 ")
7/8 7/8
× 7 ")
7/8 1/2
× 5 " to 11 × 17")
7/8 7/8 5/8
Cassette or MP Tray
A3 (297 × 420 mm)
B4 (257 × 364 mm)
A4 (297 × 210 mm)
A4R (210 × 297 mm)
B5 (257 × 182 mm)
B5R (182 × 257 mm)
A5R (148 × 210 mm)
Folio (210 × 330 mm)
11 × 17"
8 × 14"
1/2
11 × 8 "
1/2
8 × 11"
1/2
5 × 8 "
1/2 1/2
8 × 13"
1/2
8 × 13 "
1/2 1/2
8K (273 × 394 mm)
16K (273 × 197 mm)
Appendix
Appendix-3