Orientation Of Original Document; Setting Sleep Timer Timeout - Kyocera KM-8030 Advanced Operation Manual

Orientation of Original Document

Specifying the orientation of the original document on the platen. This is accomplished by telling the
copier the direction to which the top side of the original faces.
1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2 Press [ ] or [ ] to select Orig. Set
Direction and press [Change #].
3 Select [Top Edge] ([Back Edge]) when
the top of the original is facing towards
the rear side of the copier or [Left Top
Edge] ([Left top corner]) when the
original is facing towards the left side of
the copier.
4
Press [Close]. The touch panel will return to the Machine Default screen.

Setting Sleep Timer Timeout

The Sleep timer conserves energy where there is no operation on the operation panel or data is
received. This predetermines the period of time before the copier enters sleeping.
The Sleep timer can be set from 1 to 240 minutes in 1-minute increments.
NOTE: If the copier is used frequently, we recommend using a longer timeout. If it is used
infrequently, use a shorter timeout.
1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2 Press [ ] or [ ] to select Sleep mode
changing time and press [Change #].
System Menu / Counter
Machine Default
Default menu
Check MP tray sizing On
Paper Type (paper weight)
Select paper type(2sided)
Special paper action mode Adjust print direction
Orig. Set Direction Rear
System Menu
Orig. Set Direction
Select default mode for Original set direction,
Rear or Left top corner.
Top Edge
Left Top
Edge
System Menu - Machine Default
System Menu / Counter
Machine Default
Default menu
Paper Type (paper weight)
Select paper type(2sided)
Special paper action mode Adjust print direction
Orig. Set Direction Rear
Sleep mode changing time 90
System Menu
System Settings
Setting mode
Change #
Back
Setting mode
Minute Change #
3-27