Download  Print this page

Kyocera KM-8030 Advanced Operation Manual: Synergy Print Box

Kyocera km-8030: user guide.
Hide thumbs

Advertisement

Document and Output Management Functions

Synergy Print Box

Register originals as documents in the Synergy Print Box to print later in the desired quantity as
needed without the originals themselves. Up to ten of these documents can be combined into a
single copy job for printing. You can also print out all documents in the Synergy Print Box as a single
job. If the copier is equipped with the optional printer kit or scanner kit, you can also register printing
or scanning data in the Synergy Print Box. For further details, refer to the Operation Guides of the
printer or scanner kit.
The Synergy Print Box holds 100 individual boxes (numbered 001 to 100). The boxes can be
assigned to each departments. The documents registered to each box can be used as shared
documents among departments.
Registering Documents
Register documents in the Synergy Print Box as follows.
1
Place the originals to register as documents and press the Document Management key.
2
Under Synergy Print Box, press
[Document Input] ([Document Registr.]).
3
Select the destination box. To enter the
box number, press the key for the box,
or use the numeric keys followed by
pressing [Enter].
4
Press [Change Name] and enter the
document name.
For instructions on entering characters,
refer to Entering Characters When Using
Document Management Functions on
page 3-58.
If you prefer not to name the document,
go to the next step.
5
Complete the scanning settings required for the original.
The following functions are available.
Tab
Basic
Quality
Edit
6
Press the Start key to start scanning the original. When scanning is complete, the touch panel will
return to the Document Management screen. To register other documents, repeat steps 2 to 6.
2-8
Document Management
Shared Data Box
Document
Input
Box
Editing
Document Input
Document Management
Document Input
Documents
Doc001
Functions
Selection of original sizes, selection of document sizes, selection of original
types, zooming and original orientation
Exposure level and original quality
Border erase and batch scanning
Select function.
Synergy Print Box
Document
Document
Printing
Input
Box
Editing
Select box No.
-
Synergy Print Box
Ready to register document(s).
Place originals then press Start key.
Change
Name
08/08/
Form box
Document
Form
Printing
Reg.
Box
Editing
(
Original
8½x11"
08/08
Auto
1 sided
Select
Original
Orig.Size
Type
Auto size
100%
Select
Reduce
Regi. Size
/Enlarge
Basic
Quality

Advertisement

   Related Manuals for Kyocera KM-8030

This manual also for:

Km-603080306030

Comments to this Manuals

Symbols: 0
Latest comments: