The copier will automatically turn on and off at the specified times on the specified weekdays. This
feature enables you to make copies immediately in the morning and frees you from the task of
turning it off at night.
NOTE: When using the Weekly Timer, leave the copier plugged in even when it is not in use. Keep
the Main Power Switch on ( | position).
For the Weekly Timer to work correctly, the time zone and date and time must be set correctly. For
further details, refer to Setting Time Difference (Time Zone) on page 3-32 and Adjusting Date and
Time on page 3-31.
The weekly timer includes the following menus to adjust.
Temporarily Cancel the
Weekly Timer On/Off
Accessing the Weekly timer (Week timer) Screen
Follow the steps as below to begin adjusting the Weekly Timer by accessing the Weekly timer
(Week timer) screen.
Press the System Menu/Counter key.
Press [Weekly timer] ([Week timer]).
Use the numeric keys to enter the
four-digit management code. By default,
the management code is 6000 for 60
cpm model and 8000 for 80 cpm model.
The Weekly timer (Week timer) screen
will be displayed.
NOTE: For security, it is recommended to change the management code. Refer to Changing
Management Code on page 3-32.
When installing the optional security kit, enter the eight-digit management code. By default, the
management code is 60006000 for 60 cpm model and 80008000 for 80 cpm model.
Proceed to the next section to make settings to the Weekly Timer.
Specifies the time to turn on and off the copier for each
day of the week.
Temporarily cancels the Weekly Timer for the specific
days. This feature may be useful when you want to turn
off the copier during holidays, etc., without losing the
Weekly Timer settings.
Activates or deactivates the Weekly Timer.
m Menu / Counter
Enter the administrator number.