Setting Low-Power Timer Timeout; Setting Auto Clear Timeout Time - Kyocera KM-8030 Advanced Operation Manual

System Settings
3
Use [+] to increase the time or [-] to
decrease the time from 1 to 240
minutes.
4 Press [Close]. The touch panel will return to the Machine Default screen.

Setting Low-Power Timer Timeout

Specifies the period of time before the copier enters Low-Power mode.
The Low-Power time can be set from 1 to 240 minutes in 1-minute increments.
1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2 Press [ ] or [ ] to select Low power
mode chng. time and press [Change #].
3
Use [+] to increase the timeout or [-] to
decrease the time out from 1 to 240
minutes.
4 Press [Close]. The touch panel will return to the Machine Default screen.

Setting Auto Clear Timeout Time

Automatically clears all temporary settings on the operator panel when no operation is made on the
operator panel. Those settings revert to the default settings after the predetermined period of time.
You can specify the period after copying before the copier automatically clears the previous
settings.
The auto clear timeout can be set from 10 to 270 seconds in 10-second increments.
1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
3-28
Sleep mode changing time
Set Changing time to turn automatically into sleep mode
after last setting,or when copying is done.
90
Minute
System Menu - Machine Default
System Menu / Counter
Machine Default
Default menu
Select paper type(2sided)
Special paper action mode Adjust print direction
Orig. Set Direction Rear
Sleep mode changing time 90
Low power mode chng. time 15
System Menu
Low power mode chng. time
Set Changing time to turn autom. into low power mode
after last setting,or when copying is done.
15
Minute
System Menu - Machine Default
Back
Setting mode
Minute
Minute Change #
Back