Kyocera KM-8030 Advanced Operation Manual page 35

Adding the back cover is optional.
The paper source to supply the paper for the cover is specified using the system menu. Refer to
Specifying Cassette for Cover Paper on page 3-9.
Thick or transparency must be supplied from the MP tray.
IMPORTANT: During one-sided copying, duplexing and copying on the back of covers are not
available even if specified. Only the front side of the cover will be copied.
Follow the steps as below for adding cover.
1 Place the originals in the document processor or on the platen.
2 Press [Function].
3
Press [Cover Mode].
4 Press [Add Cover] and complete the
front cover settings.
Setting
[Blank]
[Front copy]
[Back copy]
[2 sided copy]
5 For the back cover, press [Add Cover] or
[No cover] as desired.
If you press [Add Cover], complete the
back cover settings.
6 Press the Start key.
If the original is placed on the platen, Scan next original(s) will be displayed. Place the next original
and press the Start key.
After scanning all originals, press [Scanning finished] to start copying.
Ready to copy.
Select
Paper
Exposure
Mode
Orig.Image
Quality
Sort/
Offset
Basic
Ready to copy.
Cover Mode
Front cover
No cover
Add Cover
Description
Both the front and back covers are blank.
Copied on the front cover.
Copied on the back cover.
Copied on both the front and back covers.
to copy.
Blank
Front copy
2 sided/ Select
Separation Orig.Size
Reduce Auto
/Enlarge Selection
Margin/
Page #
Centering
Border Cover
Booklet
Erase Mode
User choice
Function
Shortcut
Back copy
Blank
2 sided
Front copy
copy
Shortcut
Rear cover
Back copy No cover
2 sided
Add Cover
copy
Copying Functions
Paper Size
11x8½
100%
Combine
Batch
Up
Scanning
Form
Down
Overlay
Program
Paper Size
11x8½
100%
Back
No cover
Add Cover
Paper Size Set
11x8½"
100%
Back Close
Blank Back copy
2 sided
Front copy
copy
1-29