Making Copying On Letterhead Paper Easy - Kyocera KM-8030 Advanced Operation Manual

4
Select [On] to allow duplex copying or
[Off] to prohibit duplex copying to the
custom paper type.
5 Press [Close].
6 Press [Close]. The touch panel will return to the Machine Default screen.

Making Copying on Letterhead Paper Easy

Copying the original onto letterhead paper requires that the orientation of the original and the target
paper match with each other. By switching [Adj(usting). Print Direction] on, the copier correctly prints
the original onto the letterhead paper when the original and the letterhead paper are aligned with
each other in the same orientation on the platen and in the paper cassette.
This function also applies to prepunched and preprinted paper.
Place the original and the letterhead paper as shown below.
Portrait
Original
Landscape
Original
NOTE: Load paper in the cassette with the printing side facing down. When loading paper in the MP
tray, load it with the printing side facing up.
Copying with [Adj. Print Direction] activated may be slightly slower.
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2 Press [ ] or [ ] to select Special paper
action mode (Specif. paper action mode)
and press [Change #].
Custom 1
System Menu
Paper Finished
Copy
Paper Finished
Copy
Machine Default
Paper type (4th drawer)
Check MP tray sizing
Paper Type (paper weight)
Select paper type(2sided)
Special paper action mode
System Menu
Off
On
- Machine Default - Select paper type(2sided)
Cassette
Cassette
System Menu / Counter
Default menu
Plain
On
Adjust print direction
System Settings
Back
MP tray
MP tray
Setting mode
Change #
3-25