Default Of Copy Limitation - Kyocera KM-8030 Advanced Operation Manual

3
Select Excess of limit Setting and press
[Change #].
4 Press [Stop job immediately], [Stop after
job done] or [Only warning].
5
Press [Close].
6
Press [Close]. The touch panel will return to the Job Accounting screen.

Default of Copy Limitation

Specify the default of copy limitation when registering a new department.
1 Access the Job Accounting screen. (For instructions, refer to Accessing the Job Accounting Screen
on page 4-3.)
2 Press [Job Accntg Def. Set.].
3 Select Def. Val. of coun. Limit and press
[Change #].
4
Use the numeric keys to enter the
number of pages from 1 to 999,999.
Job Accounting Def set.
Setting Item
Copy Job Accounting On
Print. Job Accounting On
Printer error report Off
Others Mgt. Reg. (print) Off
Copy/Printer output mgt. All
Scanner Job Accounting On
Excess of limit Setting Stop after job done
System Menu - Job Accounting -
Excess of limit Setting
Select proper setting when limit exceeded.
Stop job
immediatly
Stop after
job done
Only
warning
System Menu - Job Accounting - Job Accounting Def set.
Job Accounting
Job Accountg T
Management Each Mgt.
Total Total
System Menu
Job Accounting Def set.
Setting Item
Print. Job Accounting
On
Printer error report
Off
Others Mgt. Reg. (print)
Off
Copy/Printer output mgt.
All
Scanner Job Accounting On
Excess of limit Setting Stop after job done
Def. Val. of coun. Limit
System Menu - Job Accounting -
Def. Val. of coun. Limit
Default value of counter limit can be set.
Limited value
System Menu - Job Accounting - Job Accounting Def set.
Job Accounting
Value
Change #
Job Accounting Def set.
Back
Register/Sett.
Management Job Accntg
Edit Def. Set.
Value
Change #
Job Accounting Def set.
Back
Clear
J
O
4-25