Installation Best Practices; Recommendations; Point Of Reference - Raven SC1 Accessory Installation Manual

CHAPTER 2

INSTALLATION BEST PRACTICES

RECOMMENDATIONS

Before installing the SC1/TC1 system, park the machine where the ground is level, clean, and dry. Bleed pressure
from the hydraulic system and leave the machine turned off for the duration of the installation process.
During the installation process, follow good safety practices. Be sure to carefully read the instructions in this
manual as you complete the installation process.
Raven Industries recommends the following best practices when installing or operating the SC1/TC1 system for the
first time, at the start of the season, or when moving the SC1/TC1 system to another machine:
• Verify that the machine's hydraulic system is using fresh oil and that the filters have been recently changed
• Ensure there are no issues with the machine's hydraulic system (e.g., pump issues, faulty hydraulic motors, fine
metal deposits in the hydraulic hoses, etc.).

POINT OF REFERENCE

The instructions in this manual assume that you are standing behind the machine, looking toward the cab.
6 SC1™/TC1™ Installation Manual for Fendt 200 VFP Varioguide (with Fendt One, Model Year 2021)
WARNING
Carefully read and follow all safety requirements
and precautions contained in this manual and the
machine-specific Installation Manual. Failure to
follow safety instructions may lead to equipment
damage, personal injury, or death.