Installation Best Practices; Recommendations; Point Of Reference - Raven RS1 Installation Manual

Hide thumbs Also See for RS1:

Table of Contents

CHAPTER 2

INSTALLATION BEST PRACTICES

Before installing the RS1™ system, park the machine where the ground is level, clean, and dry. Bleed pressure from

the hydraulic system and leave the machine turned off for the duration of the installation process.

During the installation process, follow good safety practices. Be sure to carefully read the instructions in this

manual as you complete the installation process.

Raven Industries recommends the following best practices when installing or operating the RS1™ system for the

first time, at the start of the season, or when moving the RS1™ system to another machine:

• Verify that the machine hydraulic system is using fresh oil and that the filters have been recently changed.

• Ensure there are no issues with the machine hydraulic system (e.g., pump issues, faulty hydraulic motors, fine

metal deposits in the hydraulic hoses, etc.).

The instructions in this manual assume that you are standing behind the machine, looking toward the cab.

WARNING

Carefully read and follow all safety requirements

and precautions contained in this manual and the

machine-specific Installation Manual. Failure to

follow safety instructions may lead to equipment

damage, personal injury, or death.

RS1™ Installation Manual for Claas OSI Harvesters

Table of Contents