8.8
Setting the keep alive function
[Explanation]
It is regularly confirmed whether the network is connected by setting "Keep alive function".
Moreover, the cycle when "Keep alive function" is executed is set.
Note: When the recorder is in recording, the setting cannot be changed.
[Operation]
Select the Comm. key
Keep alive function
①
ON/OFF of "Keep alive function" is selected.
Keep alive cycle
②
The "Keep alive cycle" is set. (1 to 240 min)
Please input an arbitrary "Keep alive cycle" from the numeric input screen, and set it with the OK
key. (After the power supply is turned on again, it becomes effective.)
Ethernet2 key on the System.
⇒
8-9
①Keep alive function
②Keep alive cycle
Need help?
Do you have a question about the TRM20A and is the answer not in the manual?