Toho Electronics TRM20A Operation Manual page 141

(1) [Data]
Measurement data is stored only when the extended security function is disabled.
For the folder composition when extended security is disabled, refer to Section 10.17.
(2) [Cap]
The image taken by capture is preserved by bmp. The max preservation number is 100.
(3) [Etc]
The data of the character string table is preserved. (.txt)
The character string table can be used with the list key to the character input screen.
(For the character input screen, refer to section 7.4.)
(4) [Prm]
Parameter configuration file (.dps) set with the main body of the Recorder is preserved.
The "dps" file preserved in this folder can be read and written with the main body of the
Recorder.Please put the file generated with the parameter loader in this folder.
(5) [EXSEC_ XXXXXXXXXX(Serial number)]
It is a folder specialized for extended security.
In the folder name, the serial number is attached and it is created in a format that can
distinguish the recorder.
A record data folder and a parameter log folder are created under this folder.
(6) [Prm_YYMMDD_hhmmss]
This folder is generated when log output is executed. It is generated every time log
output is executed.For log output, refer to Section 8.6.
In the folder, a text file in which event log, communication log, security log are
described, and dps file which can check parameters with parameter loader are stored.
For the parameter log file, refer to Section 10.19.
(7) [YYMMDDHHmmss]
It is a record data folder. Measurement data files, user information files, and security log files are
stored in the measurement data folder. For details of each file, refer to "TRM20A Extended
security function Paperless recorder & Ex.Sec Viewer Instruction manual" (option). The folder
name is named by the recording start time. Folder naming conventions are shown below.
(8) [Prm]
This is a parameter log folder.
A parameter log file is created under this folder.
For the parameter log file, see Section 10.19.
10-14